Enter your PIN to open EXAM360 Payroll & Benefits. Full-access and Public-view PINs both work here.
Alert: Report any system issues to the Management or Team Leader immediately.
Enter your registered email — we'll check your account and send an OTP if everything's in order.
An OTP has been sent.
Generating a PDF needs the secret PIN. Preview is always free to use.
💰
EXAM360
Only checked benefits are fetched into the payslip, even if the employee is individually eligible by tenure and attendance.
Note: This section is primarily applicable to Full-Time employees. It may also apply to Part-Time employees at the sole discretion of the Management.
Meeting the specified eligibility period does not guarantee approval of these benefits. The Management reserves the absolute right to approve, defer, or deny such benefits based on the employee's overall performance and organisational requirements.
Factors considered may include, but are not limited to:
The Management's decision regarding the grant of these benefits shall be final and binding.
Click any stat to jump to that section
Candidates who filled the public form. Tick one or many to move them to Completed or delete them.
Select an employee, then a date range — the system auto-calculates Estimated Working Days (excluding every Sunday as the Weekly Holiday, plus any Festival/Office Holiday from the Yearly Holiday List), pulls Present Days from Attendance Records, and works out the overall Attendance %. Add Manual Entries for present days the attendance system didn't capture.
Tap 📅 to pick the date/month/year from a calendar, or type it directly in DD-MM-YYYY format.
Alert: Yearly growth, bonus, and other benefits are subject to 85% work presence (last 365 days) and satisfactory performance. You may be required to provide emergency backup support when needed. Report to work on time; up to 15 minutes' grace may be allowed only in rare cases, not as a regular habit.
Please read and accept these conditions before engaging with EXAM360.
Every candidate is considered in the following phases:
The longer you work, the more your responsibility will gradually increase. If you do not show interest in taking responsibility, the office reserves the right to shift you to lower-tier tasks, budget cuts and a reduced scope of work. You must actively and properly meet expectations, and be cooperative with the office, team leader, management, admin and other officials. If there is a repeated nature of disrespect towards the growth of the organisation, the office reserves the right to take necessary steps as per the need. After 3 months, the company checks your performance on a monthly basis and provides reports from time to time. If there is any visible performance downfall, the office reserves the right to change your portion or decrease the agreed payout.
Once you have completed 6 months, you are expected to have sufficient knowledge, which you must share with those who need more attention, i.e. juniors or any senior candidates. You must also guide others, so that the organisation can deliver the best results to our valued consumers.
If you have a negative mindset or do any activity that provokes other official team members, the office reserves the right to take any action, at any stage, as per the situation. During office hours, do not gossip, form any kind of group (groupism) or take part in any other activity that is strictly not allowed in the office.
We generally categorise candidates into the following categories:
The company / firm / business reserves the right to replace, change or shift any candidate to any other portion of work, at any time or any stage. Make sure you are ready to accept these conditions from Day 1. If, after a few days, you plan to make any changes, you may be penalised for it.
During emergencies, the most senior members, with the help of other officials, must carry out the task so that no problem occurs on the consumer side. After joining, if you plan to make any change, the office reserves the right to penalise you for it.
Be regular and punctual, and complete work on time. Inform your team leader in advance of any leave or absence.
Customer details, company data and login credentials are confidential. Never share or misuse them, during or after your engagement.
Report your work truthfully. False reports, fake entries, or misuse of company systems may lead to strict action. After joining, you are expected to work independently, avoid creating groupism or engaging in any similar disruptive activities, and remain focused on your assigned work, responsibilities, and performance level.
Senior members may be required to change their portion of work, so that juniors can be allowed in their place. The company expects senior members to work in those portions of work where juniors generally are not able to perform.
The company may update or change norms or policies from time to time, as per need, and such changes will be notified to you. The company also reserves the right to discontinue any section or portion of work, where the company may shift the existing teams to other portions.
All officials, including Part-Time, Full-Time, Contractual, and Freelance workers, working at any EXAM360® (INDIA) branch, office, or from home, must serve the complete 30-day notice period before leaving, unless an authorised written waiver is granted by Management. Failure to serve the required notice period will constitute a violation of this Acknowledgement & In such conditions it will be considered as "Blacklisted". Also all your Outstanding amounts will be withheld or adjusted only as permitted under applicable laws and contractual terms.
Fill in the details manually — nothing here is tied to an employee record, so this works for anyone.
Leave blank to use the default: "Director / Owner / Management (Krishna Ghosh)"
Write any official letter on the company letterhead, preview it exactly as it will print, then generate a PDF.
Note: This letterhead is strictly for internal official matters and may be used only by Official Staff Members / Associate Partners. It must not be used for communication with any external company, organisation, legal authority, jurisdiction, or for any legal matter. Any such unauthorised use will be considered a violation of Company/Organisation Policy.
All employees and admins are selected by default — uncheck anyone you want to exclude.
"News & Updates" records are created automatically when an Office Notification email is ticked "Also publish" — or added manually here. "Notifications" are always created directly here. Both are visible publicly under Resources → News & Updates, without login, and can be edited or deleted below.
Upload customer emails (bulk or one at a time), schedule a rating email per contact, and track 1-5 star responses — 4-5 star ratings redirect to the app or Google reviews, 1-3 star ratings capture a comment instead. Every recipient's email link works only once. Contacts who don't rate get up to 2 automatic follow-ups (different subject each time, 1 day apart) — reminders stop for good the moment a contact rates.
Excel file with 3 columns: Email | Buying Mode (App / Other / leave blank) | Shipped Date (dd-mm-yyyy).
One Shipped Date, Send After (Days) and Send Time apply to every row below — add as many customer emails (with their own Buying Mode) as you like, then save them all as a single batch.
Sends a real, fully working email to the address below right now — click through its stars to see the app redirect, the Google redirect, or the low-rating comment page.
Upload the logo image to your server first, then paste its public URL here — it must be reachable over the internet for it to show up inside the email.
Users pulled daily from AZGIFT (Reward Club) via Settings → 🎁 AZGIFT Integration, where the 3-stage email drip is also configured (each email's own day-gap from the registration date, On/Off switch, and Book Showcase). The last 4 columns below track that drip for each person — when Email 1/2/3 actually went out, and if/when/how they clicked (which immediately stops the rest). This list is read-only; it just mirrors what's happened so far.
| Sl | Mobile | Purchased From | Buying Experience | Interest | Rating | Location | Pincode | Registered On | Email 1 Sent | Email 2 Sent | Email 3 Sent | Clicked |
|---|
Everyone who submits the public enquiry form at hr.exam360.co.in/quick-enquiry (OTP-verified) — read-only here, purely so you can see who registered and their full details against a Batch ID. This form keeps working exactly as before, including still sending its data to the listing portal separately; this tab just also shows you the same records.
| SL. No. | Batch ID | Name | Age | Phone | Preference / Cause of Enquiry | Applied on Listing Portal | Registered On | Action |
|---|
Everyone who registered on the public "Check Your Eligibility" page at hr.exam360.co.in/payroll/check-candidate-eligibility — one row per candidate account. Click a Batch ID (or 👁️) to see every time that candidate has run a check and what the system decided each time. Deleting a candidate here removes their account and their whole check history — they'd need to register a brand new account to use the page again. Manage branches and messages under Settings → Manage Candidate Eligibility Check.
| SL. No. | Batch ID | User Name | Phone No. | DOB | Age | City | State | Account Creation Date & Time | Action |
|---|
| SL. No. | Batch ID | Checked For | Date & Time | Job Type / Branch | Result | Action |
|---|
They will need to register a brand new account to use the eligibility page again.
Enter Secret PIN to confirm deletion
Everyone who submitted an enquiry on the public "New Candidate Enquiry" page at hr.exam360.co.in/payroll/new-visitors-records and completed Admin or Staff verification — one row per finalized enquiry. Click a Batch ID (or 👁️) to see the full submitted details.
| SL. No. | Batch ID | Name | Phone | Post Applying For | Verified By | Submitted On | Action |
|---|
This cannot be undone.
Enter Secret PIN to confirm deletion
Businesses that self-registered at /payroll/b2bcustomer. New accounts start Inactive — review their details below and set them Active to let them log in and (soon) place orders at /payroll/b2b; they'll get a confirmation email the moment you do. Temporary Disabled blocks new orders but keeps their past records visible to them; Blacklisted blocks login entirely, and blocks anyone from re-registering with that email or phone/WhatsApp number (with a generic error — they're never told they're blacklisted).
| Sl | Business | Owner | Position | Phone | Type | Registered On | Status | ⚠ | Action | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
Blacklist this account?
They'll be blocked from logging in immediately, and can't re-register with the same email or phone/WhatsApp number. This is a serious action — make sure it's intended.
Read-only view of every order placed by B2B partners, across every stage. Day-to-day processing (Under Process, Performa Invoice upload, Payment Verification, Despatch) happens in the staff portal at /payroll/b2b-check — from here you can only Cancel or Reject an order.
| Sl | Batch ID | Business | Phone | Mode | Placed On | Stage | Action |
|---|---|---|---|---|---|---|---|
| Loading... | |||||||
Or add individual DIGIPINs manually below:
Safe-T tabs — "Safe-T Pending" & "Safe-T Filed" always show. Tick to also allow:
Require Attachment (Reference Image / Document) When Requisition Type Is:
🚫 Restrict Days — Presence Records (Attendance Page)
Tick a day to block this staff from the attendance page (presence-records) on that day. They can still log in and use every other menu. Nothing ticked = no restriction.
Days follow Indian Standard Time (IST).
⏳ Last Allowed Attendance
Pick the last date this staff may use the Presence Records page. From the next day they cannot log in to presence-records any more — even if the account is still Active. Leave blank = no end date.
The date itself is still allowed (IST). Accounts set to Inactive, Terminate or Blacklisted cannot log in to any portal at all.
📊 My Performance — Months Visible
How many previous months this staff can view / download in My Performance (presence-records), in addition to the current month. Default = current month + last 3 months. Example: 1 = current month + previous month only.
📋 Daily Task Report — Section Access (submit-daily-report page)
No sub-sections built here yet — more will be added as needed.
"Packaging Boy Full Records" lets this employee view the exact same admin table (search, Pending/Completed/All tabs) from their own login, and mark batches Completed/Back to Pending — they still can never delete a batch, that stays admin-only. The separate "Collect Reports" tick is required too before the Collect Reports tab appears for them — the employee picker inside it only ever lists staff who themselves have Packing Boy access, never the full employee list.
Controls exactly what this employee can pick at hr.exam360.co.in/payroll/submit-daily-report. Nothing checked = they can't access the page at all. Checking a sub-section automatically checks its Main Section.
Unchecking a box blocks login to that specific portal only — all other access (main Payroll login, etc.) is unaffected. Order Management, Create Pre-Chargeback, Company Letterpad and Daily Task Report sections are unchecked by default for everyone — each must be explicitly granted per employee, unlike the two portals above.
Grants an "Emails Marketing" tab (Upload in Bulk & Manual Entries only — Batches, Send Test and Settings stay admin-only) inside the selected portal for this employee. Choose None to remove this access entirely.
When ON, this employee's record will not show on the public Employee Verification lookup — visitors will instead see a generic technical-error message.
Off by default. When ON, the lookup will also show this employee's Date of Joining, Tenure of Work, and Position Allotment — otherwise only Shift Type and Mode of Working are shown.
Grants access to https://hr.exam360.co.in/payroll/telecaller-qc — unchecked by default, must be explicitly granted.
Set up a pool of DIGIPINs per branch (up to 20 each). In Manage Employees, "Fetch Branch DIGIPIN" pulls a branch's whole list onto one employee in one click. This section is Access-PIN protected and never shown to Public PIN sessions.
A separate roster purely for WFH tele-calling candidates — not the same list as regular payroll employees. Only Active users here can log into the Tele-Caller portal.
Save reusable Subject/Body pairs here — pick them up instantly from the Notification tab's Purpose dropdown instead of retyping each time.
Emails waiting to be sent. Once one sends successfully, it moves to Email History automatically — but only if "Save to History" was checked when it was scheduled.
Note: This admin view is read-only. Employees create and manage their own reminders exclusively through the Task Reminder portal.
Submissions from staff via submit-daily-report (Packaging Section ▸ Packing Boy, for now). Each submission is locked once sent — mark it Completed once you've processed it. Click any Batch ID to see every record inside it.
| SL. No. | Batch ID | Submitted By | Main Section | Sub Section | Items | Submitted At | Status | Completed By | Action | |
|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | ||||||||||
Pick a staff member and a date range to see, in one click, how many batches they submitted, how many are still Pending vs already Completed, and how many scanned records are inside each.
| SL. No. | Batch ID | Items | Submitted At | Status | Action |
|---|
For emergencies only — someone was present but forgot to mark Shift Start/End, or the site/DIGIPIN was down. Add one row per employee+date you need to fix — mix as many different employees and dates as you like — then save them all together. Any row that already has a record on that date gets flagged and skipped; delete the existing shift first, then re-enter it here.
Permanently deletes Shift Start/End records within a date range — useful for removing test/dummy data. Leave Employee blank to clear for all employees. This cannot be undone.
Pick a date range, choose which employees to include (or select all), and preview everyone's attendance together — up to 3 months per run.
⏳ Retention Notice: The system keeps expense records for 90 days only. Records older than 90 days — along with their attached files — are automatically and permanently deleted.
This cannot be undone — the record and any attached files (screenshot/invoice) are permanently removed. Add one or more Batch IDs, fetch to confirm what you're about to delete, then confirm with your Secret PDF PIN.
Every bulk "Mark as Paid" action, grouped by the payout it created. Search by amount, any Batch ID (payout or individual expense), or admin email.
Full visibility into every claim, with Delete, Edit, and Revert Status — actions not available to regular portal users.
Daily summary of every Safe-T Claim batch created.
| SL. | Batch Created Date | Total Batch Created | Current Status |
|---|
Select an employee and a metric to enter their performance data — the score is calculated automatically from the chart configured in settings.json.
Manage frequently asked questions. Visibility controls where each FAQ appears: All shows on the landing page and after login, Employee Side shows only in the "?" help popup after login, Public shows only on the landing page before login.
Every search performed on the public Employee Verification portal, matched or not.
🚨 High Alert Emails
When ON, admins get an email every time a searched record matches an employee in the system.
| SL. | Employee Name | Last 4 Aadhaar | ID No. | Date & Timestamp | IP Address | Location | Device Type | Device Model | Browser |
|---|
Automatic daily backups at 1:00 AM — the 3 most recent are always kept on the server.
| Backup Date & Time | File | Size | Action |
|---|
⚠️ Restore From Backup
This overwrites the entire live database with the file you upload. A safety snapshot of the current data is taken automatically first, but this is still a serious, hard-to-fully-undo action — only proceed if you're certain.
All of this project's database table structure, kept in one place — so if you move to a new server, you don't have to hunt down every CREATE TABLE from scattered files. Every statement is CREATE TABLE IF NOT EXISTS, so running this is always safe — it will never create a duplicate table or touch existing data, whether the database is brand new or already has years of data in it.
✅ Set Up This Server's Database
Run this after pointing backend/config.php at a database (new or existing). Creates any table that's missing; silently skips any table that's already there.
🔄 Regenerate Schema File From This Server
Run this on your current/old server before migrating — it re-reads the live database's actual structure right now (including any column added automatically since this file was last generated) and rewrites the schema file below. Then download it and bring it to the new server.
Every cron job this project relies on, documented in one place — schedule, purpose, and a ready-to-paste command using this server's real path. If you ever move to a new server, come back here, copy each command below, and paste it into the new host's Cron Jobs page.
Select multiple images (from desktop or mobile) and combine them into a single PDF — arranged as a 4×5 grid, up to 20 photos per page (e.g. 44 photos → 3 pages). Every photo cell is the exact same fixed size regardless of your original photo's width/height — each image is automatically center-cropped to fill its cell uniformly (like a photo grid), so the whole sheet stays neat and consistent. Images are compressed automatically to keep the final PDF a reasonable size, even for large batches.
Fill in each label like a spreadsheet row. Only Customer Name & Full Address is required — every other field is optional. Every address must contain a 6-digit PIN code — the system tells it apart from an 8-12 digit mobile number automatically. Saved as a Batch ID with full print history below. 16 labels are printed per A4 page, no PIN needed.
| SL. | Customer Name & Full Address * | Book Name | Ref. No. | Ordered From: | Action |
|---|
Updates automatically as you type — scroll inside to page through every sheet, exactly as the downloaded PDF will look. 16 labels per A4 page.
Every batch ever printed — search by Batch ID, customer name, pincode, or who printed it.
Upload one or more order files (1200–2500 records at a time is typical, but any size works) each with a customer_address column — upload multiple files together and the system assembles all of them into one combined report. This reads every row's address, detects the Indian State name inside it — however it's cased (KARNATAKA, Karnataka, karnataka all match) — and tallies how many orders came from each state. Nothing here is uploaded anywhere — it's all read in your browser.
| Sl. | Name of State | Total Orders | % of Orders |
|---|
Please upload a valid .xlsx, .xls or .csv file.
Design a single-sided visiting card — fill in your details once, pick from 6 ready-made designs (each updates live as you type), then download it as a print-ready PNG or PDF. Nothing here is saved to the server.
Office requisitions raised by employees via the Expense Manager portal.
| SL. No. | Batch ID | Employee | Item | Type | Qty | Priority | Required By | Est. Cost | Status | Action |
|---|
Tick one user, then click Login (Payroll Portal) or Attendance Login (Attendance Portal) in that row. The portal opens in a new tab, already logged in as that user — no PIN or OTP needed. Your admin session stays untouched, and every use is recorded in the Activity Log.
| SL. No. | Candidate Name | Age (In Years) | Tenure | Email ID | Phone No. | Login | Attendance Portal |
|---|
Upload each staff member's monthly PDF report. Staff see only their own PDFs for the last 12 months (view & download). Total Payments Earned is visible to Admin only. Reports older than 1 year are deleted automatically.
Candidates take the written test at https://hr.exam360.co.in/payroll/new-users-performance-check. See their scores here, print the 1-page report, and manage the question bank.
Questions written by 3rd-party creators wait here. Approved questions go into the question bank and start appearing in tests.
Allot CL / EL / Medical / CPL leave dates to a staff member. Staff can see their own records (last 1.5 years) under Leave Allotments in their own login.
Questions the bot couldn't find a real keyword match for — build a pre-built reply for these in Settings > Chat Bots, then mark them reviewed.
Login / logout report for every registered user — includes sessions the system auto-closed after 20 minutes of inactivity.
IP address, location, browser, submitted details/category, and login activity for this user.
Deletes this user's entire chat history and restarts onboarding from the language choice - useful for re-testing with an Admin Test Login account. Does not change their account status.
Reset this user's chat? Their entire message history will be permanently deleted and onboarding will restart from the language choice. This cannot be undone.
Enter Secret PIN to confirm
Enter Secret PIN to confirm
Upload your Main File and pick a date — records with a Last Date of Delivery on or before that date have crossed; everything after is on time. Nothing here is saved; everything happens on this screen only, and it's cleared if you leave or reload.
Upload a Booking File (.xlsx), then click Validate. The system checks the file matches the expected format, then reads each row's Physical Weight (grams) and matches it against your saved India Post Weight slabs (Settings → India Post Weight Assigned). A row whose weight doesn't fall in any slab is shown as ₹0 and listed under "Error" below.
Add, reorder (drag to prioritize), or remove suppliers. This list is what populates the Supplier dropdown throughout Order Management.
Turn these email alerts on or off. When off, no email is sent for that alert.
Controls only the admin email below. The public form at hr.exam360.co.in/payroll/simple-form and the Payroll ▸ Connect Candidate list always keep working,.
*/15 * * * *) with this command:curl -s "(the link above)" >/dev/null 2>&1 or php Controls only the email notification below — the enquiry form itself, at hr.exam360.co.in/quick-enquiry, and the "📝 Quick Enquiry Forms" admin listing always keep working regardless of this switch.
Everything the public "Check Your Eligibility" page (hr.exam360.co.in/payroll/check-candidate-eligibility) uses is controlled here — no code changes needed. Leave any message field blank to keep its built-in default text.
"Too Old For Packaging" applies once a male candidate is older than the Packaging max age but still within the overall male max age — they still qualify for Telecaller / Data Entry.
Add as many branches as you need — each is matched to candidates by "State", and each can independently allow/disallow Packaging, Telecaller and Data Entry roles.
Controls which tab an alert shows up under in Alerts & Reminder, based on how many days away its nearest date is. "Today's Alerts" is always exactly 0 days away and isn't editable. The two ranges below must not overlap.
⚠️ High Alerts
🔜 Upcoming Alerts
Optional. Once set, a colorful "?" icon appears next to On-Going Batch in Order Management (admin and employee side) — clicking it lets anyone download these sample files.
Shown as-is in the "Update on Your Order" message on the Tele-Caller portal — list multiple numbers however you'd like them to read (e.g. "9876543210 / 9123456789").
Two messages, each in 3 languages. Call Picked = customer picked up the call. Call Not Picked = customer did not pick up. Staff choose the message and language from the record. Choose one below to edit, then click Save Messages (saves all six). Click a tag to insert it; each tag is replaced with that record's real value.
Locked out after prolonged absence — only you can reactivate them.
Purely a reference note for admin/dev — this doesn't upload or manage image files itself. The Certificate form's Letterhead dropdown offers 5 preset options (Letterhead 1–5); to make one work, add or replace an image file named exactly letterhead-1.jpg through letterhead-5.jpg directly on the server at the path below.
Main menus appear under Resources → Targets & Structure on the login screen. Clicking a main menu opens a popup with the tabs (documents) you add inside it — the first PDF opens instantly. Drag the ⠿ handle to reorder menus or tabs.
Write in English only — shown on the Tele-Caller portal (top-right corner). Portal users can translate it to Hindi or Bengali themselves; you only manage the English source here.
These show as small buttons next to the "Negative Reviews" tab, on both admin and the Tele-Caller portal — but only for people who actually have Negative Reviews access. Leave a link's name or URL blank and that button simply won't show.
Shown on the "Add New DGPIN" page, embedded so the video plays inline without exposing a downloadable link. Paste any Google Drive share link for the video - view, preview, or the raw file link all work. Leave it blank to hide the video entirely.
When a tele-caller taps "Verify Via App", the system checks real call records for that customer's number and sums the talk time within the window below. If it meets the minimum, the record is marked Successful instantly — no admin approval needed.
🔧 Test Firebase Connection
If "Verify Via App" shows a network error, run this to see exactly which step is failing.
📞 Quick Calls
⭐ Negative Feedback
Used to build the "Update on Your Order" message for Quick Calls — estimated delivery is calculated by matching the customer's state against this list, added to the record's creation date.
🗺️ State-wise Delivery Time
| SL. | States | Min. Delivery Time | Max. Delivery Time | Action |
|---|
Candidates choose one of these when they start the test (e.g. General Test, Tele-caller, Data Entry Operator). Turn a category off to hide it from candidates.
Every test draws an equal number of questions from each active portion, then shuffles them.
Upload a square logo — it replaces the default mark on the Expense Manager login page and other portals as they're updated to use it.
No logo uploaded yet
Square image, at least 128×128px, PNG/JPG/WEBP, under 2MB.
Shown on the Daily Presence login page, before employees log in. Multiple languages are supported — just separate each section with a blank line as shown.
A daily automatic cleanup removes Photos/Videos and full Records separately, this many days after a claim was Granted or Rejected. Pending and Filed claims are never auto-deleted.
Rule: Records retention must always be ≥ Photos/Videos retention (per status). Records hold who created the claim, order ID, and comments — deleting them later than the media keeps that trail available even after storage-heavy files are cleared.
✅ Granted
❌ Rejected
A daily automatic cleanup removes "Report Error / Leave Request" Case History records — and their attachment files — this many days after they were submitted, regardless of status.
When enabled, a daily automatic cleanup removes sent 🔔 Office Notification records (and the recipient lists under them) this many days after they were sent. Off by default — nothing is auto-deleted unless you turn this on. "News & Updates" entries are separate and are not affected.
A daily automatic cleanup removes Label Generator batches — 📜 Printed Label History and all their saved customer records — this many days after they were printed. Leave blank to keep every batch forever (nothing is auto-deleted).
Each PA logs in with their own Access PIN and email at the same portal URL, and sees only the menus you grant them below. Every action they take is logged under their own name.
| Name | Access PIN | Status | Menus Granted | Action |
|---|
These links are shown under Resources on the pre-login page. Update them whenever the underlying page changes.
Opened by "Yearly Holiday List (Office)".
Opened by "Download Official Apps", shown just above FAQ's.
Weight-to-rate slabs used by "📮 Booking Amount Check" to calculate each booking's amount from its Physical Weight (grams). Ranges cannot overlap.
Opened by "⬇️ Download Sample File" on the Booking Amount Check page. Upload your sample .xlsx anywhere and paste its link here. Leave blank to use the built-in sample instead.
| Min Weight (g) | Max Weight (g) | Rate (₹) | Action |
|---|
Connection details for pulling newly registered AZGIFT (Reward Club) users into this system's 📧 Emails Marketing(E360) pipeline, so a follow-up email can be scheduled a set number of days after each person registers on AZGIFT. AZGIFT is a separate project on its own server account — these two fields are how this system authenticates to it.
The get-users-for-payroll.php endpoint on the AZGIFT server.
Must exactly match the PAYROLL_BRIDGE_KEY value set in AZGIFT's own db-config.php. Change it on both sides together — updating it only here (or only there) will break the daily pull.
How many days after a user's AZGIFT registration date the follow-up email gets scheduled. Only affects new registrations pulled after you change this — already-pulled users keep the due date they were given at pull time.
Runs the same pull the nightly cron does, right now — pulls AZGIFT's entire all-time registration history and adds/refreshes them in 🎁 AZGIFT Registrations. Safe to click anytime; it never duplicates or resets an already-pulled user's due date.
When On, every AZGIFT registration is sent up to 3 influencing emails (each with a random showcase of books from the shop, plus "Get it on Google Play" & "Visit Website" buttons). The moment anyone clicks either button on any of the 3, the rest are skipped for them for good. Off by default.
Leave blank to use the default of 45 days.
Leave blank to use the default of 60 days. Only sent if the person hasn't clicked the first email.
Leave blank to use the default of 75 days. Only sent if the person still hasn't clicked either of the first two.
What the "Visit Website" button in every email opens.
What the "Get it on Google Play" button in every email opens.
Sends the real email — exact same subject & body a registrant would receive, buttons included — to any address you enter here, so you can check it looks right before relying on it.
Automatically pulled from shop.exam360.in — every email's showcase randomly draws 15-20 books from this pool, fresh each time it's sent. Nothing to add by hand; it refreshes itself in the background automatically every 5 days — or click "Refresh Now" below any time to pull the latest books immediately.
Last auto-fetched: —
| Cover | Book Name | Link | Fetched |
|---|---|---|---|
| Loading… | |||
Staff who can log in at /payroll/b2b-check to process B2B orders. Login is email + OTP, same as the customer portal — no password is ever set. Manage Orders lets a staff member move orders through the stages, upload the Performa Invoice, despatch, cancel and reject. Verify Payment is a separate, narrower permission — only staff with it can mark a payment verified.
| Sl | Name | Manage Orders | Verify Payment | Status | Added On | Action | |
|---|---|---|---|---|---|---|---|
| Loading... | |||||||
Powers the customer chatbot at /payroll/chats. Each reply has trigger keywords/phrases per language — whatever the user types is matched against these (free, no AI, no per-message cost) and the best-matching reply is sent back automatically. You can attach one photo or PDF per reply, shown inline in the chat. Exactly one reply can be marked the Default / Fallback — sent whenever nothing else matches.
Shown to every user the very first time they land in the chat, right above the language choice (English / Hindi / Bengali). Use {Name} anywhere in the text to insert the user's own name automatically. As soon as they pick a language, the "Ask Details" pre-built reply is sent immediately — no separate work-preference question anymore. Only the message text is editable here; the language buttons themselves are fixed.
Sent instead of a location-restricted reply (e.g. a branch address — see "Restrict Reply To State" below) when the user's detected state doesn't match, or their location can't be detected.
Emails listed here can OTP-login at /payroll/chats/ to test the bot WITHOUT registering first (one auto-created test account per email). One email per line. Never shown to end users.
✅ Saved.When an admin sends a manual message in Jobs Chats to a user who's currently offline (logged out or session expired), this email is sent automatically with a button straight back to /payroll/chats. Online users never get this email — they see the reply live instead. Send yourself a test copy to see exactly how it looks.
Loads the 15 ready-made replies (branch addresses, fees, training info, payment links, QR code, etc.) into the list below. Safe to click more than once — it skips any reply that already exists by title, so it will never duplicate or overwrite your edits.
Comma-separated. A message is matched against whichever language it's written in.
If set, this reply is only sent when the user's detected location matches (comma-separate multiple states). Anyone else gets the Location Mismatch Message from above instead of this reply.
Shown under this reply in the chat. A "Link URL" button opens a website; a "Chain to Reply" button instantly sends another pre-built reply (great for building a guided flow / menu).
| Sl | Title | Keywords (EN) | Attachment | Status | Updated | Action |
|---|---|---|---|---|---|---|
| Loading... | ||||||
Same Yearly Holiday List as under "🕒 Attendance Records" — upload, view, or delete a year's list from either place, they both read/write the exact same data. This is also what the Late Alert feature on Manage Employees checks before flagging a late punch.
Manage who receives admin-side notification emails — the Notification section's admin recipient list, the Expense Report "Mark as Paid" admin-email dropdown, and slab-upgrade/report alerts all use this same list. abhishek86478@gmail.com is fixed and can never be removed; every other email can be added or deleted any time.
| Sl. | Name | Status | Action | |
|---|---|---|---|---|
| Loading... | ||||
Controls the "Late Alert" feature used by Manage Employee's Daily Shift Start/End + Weekly Holiday + Late Alert checkbox. Once an employee's first "Shift Start" punch of the day is recorded on presence-records, the system immediately checks whether that punch is late and — if it is — emails the employee and every admin right away.
✉️ Welcome Email Template
This is the email sent when you tick Welcome Email while creating/editing an employee. It is delivered to the employee's own email and to every admin email. Available tags: {employee_name} {company_name} {email} {doj}
The Test button always sends (sample data, subject starts with [TEST]) only to the admin emails: —
⏱️ Late Alert Grace Period
An employee punching in up to this many minutes after their Daily Shift Start time is not considered late. Anyone later than this immediately triggers the Late Alert emails.
🧪 Test Late Alert Email
Sends a sample Late Alert (fake sample data only — nothing real is touched) to the address below, so you can check exactly what gets delivered on each side before it ever goes to a real employee.
🧪 Dummy Testing Login (Submit Daily Report Page)
When ON, anyone opening submit-daily-report sees a "🧪 Dummy Test Login" button that logs them straight in with no OTP, for quick testing. Turn this OFF once testing is done.
⚠️ Daily Attendance Absent Alert
When ON, every day at 12:00 PM the system checks every Active employee's attendance for today — excluding their own Weekly Holiday (rest day) marked in Manage Employee. Anyone with no attendance punch recorded is emailed directly (with a motivational reminder + a link to presence-records to check their own report), and admin is copied — only for employees who are actually absent. An employee with no Weekly Holiday set on file has no exempt day, so a missing punch on any day still counts as absent for them.
🧪 Test Absent Alert Email
Sends a sample Absent Alert (fake sample data only — nothing real is touched) to the address below, so you can check exactly what gets delivered on each side before it ever goes to a real employee.
Controls the Attendance % → Bonus % table used everywhere Bonus is calculated or shown (the Bonus screen's info box, the bonus generator, and the "not eligible" message). Bonus = Basic Pay × Bonus %. Rows are matched highest Min Attendance % first, so list them with the highest attendance requirement on top.
| Min Attendance % | Bonus % (of Basic Pay) | Action |
|---|
Are you sure?
🔒 This email is fixed and cannot be changed — only the Name can be edited.
Remove this admin email?
| # | Order ID | Tracking ID | Reference No. | Weight (g) | Captured At |
|---|
Enter Secret PIN to save changes
Do you wish this alert again next time, or stop it permanently?
Enter Secret PIN to confirm deletion
This will be sent to the admin for review before it becomes an official claim.
Submitted by . Edit any field below if needed, then approve to send it live.
CSV format only. 📥 Download Sample Format
row(s) are valid and ready. row(s) below have an invalid phone number. Shall I remove those and save the rest to a batch?
Mark record(s) successful
Add a short note, then choose how to verify
This same note will be saved for all selected records.
Verification Method
🔒 Select the call outcome above to unlock the verification methods.
Mark record(s) as Unsuccessful?
✅ “Item Reach Before Delivery Time” is available here: the estimated delivery is on or before the Last Date of Delivery, so no waiting time is needed for it.
This same note will be saved for all selected records.
Cancel this scheduled email? This cannot be undone.
Enter Secret PIN to confirm cancellation
Enter Secret PIN to save these changes
Enter Secret PIN to confirm deletion
Enter Secret PIN to confirm deletion
Delete this batch and all its contacts? This cannot be undone.
Enter Secret PIN to confirm deletion
Only contacts that haven't been sent yet can have their Email/Buying Mode/Shipped Date changed. Already-sent (unclicked) contacts can still have their Buying Mode updated. Clicked, rated or failed contacts are read-only.
Enter Secret PIN to save changes
Enter Secret PIN to save changes
Add anything the next person handling this batch should know — no format required.
A safety snapshot is taken first, but everything currently in the database will be replaced by the uploaded file. Type RESTORE below to confirm you understand.
This will permanently remove and all their menu permissions. This cannot be undone.
Save these changes to this record?
Please confirm before continuing to the Secret PIN.
Enter Secret PIN to save these changes
Reference list configured in Settings. Actual estimate on a record is calculated from its creation date.
| SL. | State | Min Days | Max Days |
|---|
Showing all employees
Enter Secret PIN to confirm deletion
Add anything the next person handling this batch should know — no format required.
Enter Secret PIN to export this report as PDF
Enter Secret PIN to confirm deletion
0 expense(s) will be moved to Paid.
Defaults to the sum of selected expenses — adjust if needed.
0 expense(s) will be moved to Rejected.
This permanently deletes the case and any attached files. Enter the Secret PIN to confirm.
This permanently deletes the selected Task Reminder(s). Enter the Secret PIN to confirm.
"" will be removed from the list. This won't affect expenses already submitted with it.
Your Advance / Loan request has been sent to management for review. You'll be contacted once it has been processed.
Your issue has been reported to management. You'll be contacted once it has been reviewed.
🔒 Two PINs — the first PIN just opens the app. A separate Secret PIN is asked only when you click "Generate PDF" — Preview never needs it, so anyone can check numbers, but only someone with the Secret PIN can produce the official document.
🧾 Basic Pay — looked up automatically from your tenure (years of service) against the pay structure table. Full Time and Part Time use the bracket table; "Contract / Freelancer" employees use their own fixed negotiated rate instead.
📈 Basic Pay Structure — here's exactly how Basic Pay grows with tenure:
🎯 How Additional Benefits Work — Each additional benefit has its own specific tenure, attendance requirements, and performance criteria that must be fulfilled before it becomes applicable. These benefits are not automatically available to everyone. The Company will review each individual's past performance records, attendance, and overall performance level before deciding whether to activate the applicable benefits.
These additional benefits are strictly applicable to Full-Time and Part-Time working exclusively under the Target-Based Work Model (Target Zone), subject to the respective eligibility criteria.
For Non-Target Portions: No additional benefits will be provided, except for the Full Attendance Bonus, which will remain applicable subject to the Company's prescribed eligibility criteria. The Company reserves the right to evaluate eligibility and activate benefits based on the individual's performance, attendance, tenure, and applicable internal policies.
🗓️ Emergency Leave (EL) & Casual Leave (CL) Allotment
Note — these leaves cannot be taken all at once. CL and EL are credited every 6 months — e.g., only 1 EL is allotted in the first 6 months, and the 2nd EL in the next 6 months. The same 6-monthly crediting applies to CL.
Part Time employees — this is half of the above (1 EL/year and 1 CL/year, credited across the same two 6-month periods).
🔗 Full Time Work-From-Office System — see exactly how this works in practice: hr.exam360.co.in/work-from-office.html
📅 Yearly Holiday List — Check the complete list of company holidays to plan your leaves, personal commitments, and travel in advance. All official staff members, regardless of their work model or category, are required to ensure that leave does not exceed 2 consecutive days. This policy is applicable to all categories of official staff members, and everyone is expected to plan their holidays and leaves accordingly.
📘 Company Policy & Rule Books
As an official EXAM360 team member, you're expected to maintain professionalism, punctuality, and honesty in all your work — this includes accurately reporting attendance and task completion, keeping company and candidate data confidential, cooperating respectfully with colleagues and management, and using leave, advance, and bonus benefits genuinely and in good faith. Misconduct such as falsifying records, misusing company resources, breaching confidentiality, or misbehaviour with colleagues is not tolerated and may lead to disciplinary action. This is only a short summary — read the full Rule Book below for complete details.
| Go Through "Company Rule Books" | |
|---|---|
| English | Click Here → |
| हिंदी (Hindi) | Click Here → |
| বাংলা (Bengali) | Click Here → |
📅 Working Days — Total Days in the month minus Sundays minus Office Holidays = Working Days. If someone was present on more days than that (extra shifts), the "Extra Work Days" field appears automatically.
✅ Full Attendance Bonus (Day 1) — paid when Present Days + Casual Leave (CL) = Working Days. So an approved CL day doesn't break "full attendance" — only unexplained absence does.
🍽 Food / 🏥 Medical / 💰 Saving / 🚗 Travel Allowance — each needs the employee to have crossed a minimum tenure (6 months / 1 year / 1 year / 1.5 years) and 95%+ attendance for that period. Leave Evidence Approved (Days) lets you add prior-informed absence days on top of Present Days when checking that 95% — so someone who gave advance notice isn't penalised the same as an unexplained absence.
⚙️ Settings checkboxes — Fooding, Saving Scheme, and Travel Allowance can each be switched on/off company-wide. If unchecked, that benefit shows as "Coming" and pays ₹0 even for an otherwise-eligible employee — useful if a benefit hasn't officially rolled out yet.
➕ Manual Entries — the green box holds anything that adds to pay (leave counts, task incentives, OT/ED, Mobile Bill, Additional Benefits). The red box holds anything that reduces pay (recoveries, penalties, error adjustments). Both default to 0 and only matter if you type a value.
🔄 Live Preview — once you've generated a preview, any further change to the form updates it automatically — no need to click Preview again.
🎁 Bonus eligibility — needs 1 full year of tenure first. Once eligible, enter the Total Office Open Days (excluding holidays & Sundays) and Total Present Days (including CL & EL) for the last 365 days — the Attendance % is calculated automatically and matched against the bonus tier table below.
📊 Bonus % Chart — this is exactly what's used to calculate the bonus, so you always know what attendance unlocks what:
⚠️ This will apply w.e.f. 01-01-2027. From 2027 onward, the Bonus will be released based on this chart's criteria — however, this chart may not be followed if business conditions are not favourable.
💧 "PREVIEW" watermark — shown only on-screen so the document can't be screenshotted and passed off as final. It's automatically removed the moment a real PDF is generated with the Secret PIN.